If your faucet is leaking or dripping then it is time to replace it. Simple as it may sound there are a integrate of factors you need to look in to while replacing it. Ensue the tips given here and bathtub faucet change will be an easy task.
Faucets allow water in pipes to be used in controlled manner. Generally the bathtubs have either 2 valve or 3 valve faucets. They start leaking or dripping when washers come to be stiff and corroded. Water pressure also hastens this process. In older designs faucets there were rubber or neoprene washers. In the newer systems cartridge is used in place of washers.
Bathroom Faucet Fixtures
It is always vital to buy a literal, faucet. Faucets come in many sizes and styles. When you need to replace a faucet it is vital to take exact measurement of holes town to center. Style is optional but size is important.
Also you need to have a literal, set of tools to replace a faucet. There are varied types of wrenches for plumbing jobs. For square or hex nuts open end wrenches are ideal as they have smooth jaws. If your pipe is chrome coated and you do not want to mar the exterior then you can go for strap wrenches. If the pipe is of small diameter then you need to have vise grip wrench. Generally 2 pipe wrenches are required for plumbing one to hold and other to turn.
When installing bathtub faucets look for the faucet assembly behind walls. Generally builders would have provided a rear passage panel in the back of tub. Read the facility instructions while assembling the 2 valve or 3 valve faucets.
Here are some general steps to replace a faulty faucet.
o First of all turn the water contribute off. You can turn off the main contribute for the whole house.
o Next take off the faucet handle. Tap or pull gently. Overtime the deal with may have got welded to stem. So do not force it. If it does not come out gradually then use special deal with puller.
o Next take off the trim and the stem assembly. The stem assembly is used for controlling the number and temperature of water dispensed to the tub. Use a bath socket wrench to take off this assembly.
o Now check the washer. If it is brittle or torn then this is the cause for the drip. Take both the washer and the stem for replacement.
o Check the seats. If they are rough then they too need to be replaced. Use a seat wrench to take off it.
o When replacing you just need to assemble it all back. Grease the stem threads, washer and nut threads. Then slide them all back and tighten the nuts.
o If it is a cartridge style faucet then take off the deal with and trim. Then replace the cartridge.
So with a minute bit of know-how you can fix it yourself for -.
Bathtub Faucet transfer - Helpful Tips on Replacing Bathtub Faucets You Wouldn't Want to Miss